STANDARD-COMPLIANT TESTS
Technical safety through durability testing
We offer a wide range of material testing performed in accordance with internationally recognized standards, including ASTM, DIN, EN, ISO, and VDA. These standardized testing methods allow for the reliable characterization of the mechanical, physical, and functional properties of metals, polymers, composites, textiles, adhesives, and related materials. The table below outlines the currently supported standards, which ensure consistent, comparable, and traceable results for research, qualification, and quality assurance applications.
Standard Compliant Tests
Norm | Designation / Content |
ASTM A370 | Standard Test Methods for Mechanical Testing of Steel Products |
ASTM C393 | Standard Test Method for Flexural Properties of Sandwich Constructions |
ASTM D1781 | Climbing Drum Peel Test for Adhesive Bonds |
ASTM D2344 | Short-Beam Strength of Polymer Matrix Composites |
ASTM D3039 | Tensile Properties of Polymer Matrix Composite Materials |
ASTM D5035 | Strip Tensile Test of Textiles |
ASTM D5656 | Lap Shear Adhesive Bond Strength for Thick Adherends |
ASTM D638 | Standard Test Method for Tensile Properties of Plastics |
ASTM D695 | Standard Test Method for Compressive Properties of Plastics |
ASTM E10 | Brinell Hardness Testing |
ASTM E1004 | Determining Electrical Conductivity of Metals |
ASTM E111 | Young’s Modulus, Tangent Modulus, Chord Modulus |
ASTM E132 | Poisson’s Ratio by Tension Test |
ASTM E139 | Creep and Creep-Rupture Tests of Metallic Materials |
ASTM E345 | Shear Modulus and Shear Strength of Metals |
ASTM E466 | Axial Fatigue Test of Metallic Materials |
ASTM E606 | Strain-Controlled Fatigue Testing |
ASTM E8/E8M | Tension Testing of Metallic Materials |
ASTM E831 | Linear Thermal Expansion of Solids |
ASTM E9 | Compression Testing of Metallic Materials |
ASTM F88 | Seal Strength of Flexible Barrier Materials |
ASTM G67 | Corrosion Test – Nitric Acid Mass Loss Test |
DIN 50100 | Load controlled fatigue testing – Execution and evaluation of cyclic tests at constant load amplitudes on metallic specimens and components |
DIN 50113 | Testing of metallic materials – Rotating bar bending fatigue test |
DIN 50154 | Tensile test on foils and strips of aluminum and aluminum wrought alloys with a nominal thickness less than 0,200 mm |
DIN 53292 | Testing of sandwiches; Tensile test perpendicular to the faces |
DIN 53293 | Testing of sandwiches; Bending test |
DIN 53294 | Testing of sandwiches; Shear test |
DIN 53295 | Testing of sandwiches; Peel test by means of a drum |
DIN 53504 | Testing of rubber – Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test |
DIN EN ISO 178 | Plastics — Determination of flexural properties |
DIN EN ISO 1856 | Flexible cellular polymeric materials — Determination of compression set |
DIN EN ISO 899 | Plastics — Determination of creep behaviour |
DVS 2203 | Thermoplastic welded joints – Mechanical tests |
ISO 10113 | Metallic materials — Sheet and strip — Determination of plastic strain ratio |
ISO 10275 | Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent |
ISO 1099 | Metallic materials — Fatigue testing — Axial force-controlled method |
ISO 1143 | Metallic materials — Rotating bar bending fatigue testing |
ISO 11566 | Carbon fibre — Determination of the tensile properties of single-filament specimens |
ISO 12106 | Metallic materials — Fatigue testing — Axial-strain-controlled method |
ISO 13003 | Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions |
ISO 1519 | Paints and varnishes — Bend test (cylindrical mandrel) |
ISO 1922 | Rigid cellular plastics — Determination of shear properties |
ISO 204 | Metallic materials — Uniaxial creep testing in tension — Method of test |
ISO 3800 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
ISO 4136 | Destructive tests on welds in metallic materials — Transverse tensile test |
ISO 4344 | Steel wire ropes for lifts — Minimum requirements |
ISO 4345 | Steel wire ropes — Fibre main cores — Specifications |
ISO 4346 | Steel wire ropes for general purposes — Lubricants — Basic requirements |
ISO 4587 | Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
ISO 4624 | Paints and varnishes — Pull-off test for adhesion |
ISO 527-1 | Plastics — Determination of tensile properties — General Principles |
ISO 527-2 | Plastics — Determination of tensile properties — Test conditions for moulding and extrusion plastics |
ISO 527-3 | Plastics — Determination of tensile properties — Test conditions for films and sheets |
ISO 527-4 | Plastics — Determination of tensile properties — Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
ISO 6506 | Metallic materials — Brinell hardness test |
ISO 6507 | Metallic materials — Vickers hardness test |
ISO 6892-1 | Metallic materials — Tensile testing — Method of test at room temperature |
ISO 7438 | Metallic materials — Bend test |
ISO 7961 | Aerospace — Bolts — Test methods |
ISO 844 | Rigid cellular plastics — Determination of compression properties |
ISO 8749 | Pins and grooved pins — Shear test |
VDA 238-100 | Small Plate Bending Test for Metallic Materials |